Primary tabs

FREE SHIPPINGFree shipping on all orders over 100000 INR.

Sediment Mud Silt Remover

0
No votes yet
SKU::RXSOL-23-2900-025

Product Qty Per Unit: 
25.00
Product usage unit: 
Ltr.

Negotiate Price

Product Delivery Locations: 
Kandla, Gandhidham, Mundra, Sikka, Jamnagar, Surat, Navlakhi, Porbander, Pipava, Dehej, Hazira, Okha, Vadodra, Ahmedabad, Rajkot
Generic Name: 
Organic Poly Electrolyte
Its polymerisation dual effect mechanism help to prevent hard deposition of mud layer on metal surface as well as keeps mud particle in loose condition which causes more labour to clean .
Product Description: 

It is a odourless pale yellow POLMERISED viscous liquid for Removal of sediments, silt and mud. Its polymerisation dual effect mechanism help to prevent hard deposition of mud layer on metal surface as well as keeps mud particle in loose condition which causes more labour to clean . APPLICATION : POLYELECTROLYTE conditioner is highly economical , non toxic , non polluting chemical its lower concentration effectivenes with water keeps it in very ECONOMICAL GRADE materials class. 
 

•Proven cost effective
•Ready-to-use
•Concentrated formula
•Very low usage rates as 5 ppm
•Safe, aqueous product
•Dosing equipment available


COMMON NAME : MUD & SILT DISPERSANT ( CLEANER ) , Reduces unwanted mud load form tanks.

PACKAGING : 25 ltrs, 210 ltrs
 

Product Application: 

This conditioner is highly ECONOMICAL , non toxic , non polluting chemical its lower concentration effectivenes with water keeps it in very ECONOMICAL GRADE materials class.  Mud Remover uses the chemical principle of flocculation to attract mud particles into "flocs" (small fluffy particles). As a result, the "stickiness" of the mud is greatly reduced, preventing it from packing down and allowing for easy flushing by the water flow during deballasting.
 

FIELD FOR USE :

•Ballast Tanks
•Double Bottom
•Tanks
•Floating Drydocks
•Manual Tank Cleaning
•Cooling Water Systems

BENEFITS :::

•Increases cargo carrying capacity
•Aids in removal of existing mud deposits
•Lowers corrosion rates
•Prevents mud buildup
•Easier tank inspections by regulatory agencies
•Reduces fuel costs
•Enhances tank coating performance

Continued use of Sediment Remover prevents the deposition of sediments, mud or silt in ballast tanks, cooling water systems, pipelines etc.. Further, it can be used with mechanical action to dislodge existing mud or silt in ballast tanks. Sediment Remover should be injected in small quantities into ballast or cooling water systems prior to filling the tanks or system. Mud present will not adhere to either itself or to bulkheads, tank structures or inside pipelines. If heavy deposits are present, an increased dosage will remove a portion of the sediment after each application. Thick mud deposits will require several applications.

Product Procedure: 

 0.002 to 0.005 % ( i.e 200 ml for 10000 Ltrs water ) ,depends on DEPOSITION of MUD.

ONE litre of Sediment Remover per each 10 tonnes of Ballast Water. ONE litre of Sediment Remover per each 10 tonnes of Cooling Water. For the removal of existing accumulations increase the dosage by 2-3 times depending on the ballast time available and the quantity of mud to be removed. Mechanical agitation may be required.

Inject Sediment Remover preferably into the suction line of the ballast or cooling water pump to ensure thorough mixing with the incoming water. If possible, circulate the water through the tanks and the suspended mud and silt will be pumped out when de-ballasting.
 

Product Note: 

Reduces unwanted mud load form tanks

RXSOL-23-2900 is a liquid cationic polymer of high molecular weight, specifically designed to treat, condition and prevent the deposit of mud and sediment commonly found in ship’s ballast tanks.RXSOL-23-2900 uses the chemical principle of flocculation to attract mud particles into small fluffy particles . As a result, the “stickiness” of the mud is reduced, preventing it from
packing down and allowing for easy flushing by the water flow during deballasting.

RXSOL-23-2900 is considered nonhazardous and nontoxic, but as is normal when handling any chemical, care should be exercised to prevent
eye or skin contact. Should contact occur, wash affected areas with water. Standard protective equipment is recommended.

Physical Properties
Clear to pale yellow liquid
Specific Gravity: 1.06@20'C
pH: 8.5

Product Technical Specification: 

Features & Benefits
A highly effective liquid compound for the removal of sediments, silt and mud from ballast tanks, cooling water systems, pipelines.

Sediment Remover will keep mud in suspension and will clean fouled systems completely provided the appropriate dosage levels and application times are adhered to.

Sediment Remover is a Polymer based product. It does not contain acid, alkali or solvent. Sediment Remover is completely biodegradable and hasno hazard indications.

Product pack size: 
25, 50, 210 Ltr Heavy duty JAR packing Mud & Silt Remover available with us at all Indian and Middle East coastal.
Product alias: 
<p> Poly Electrolyte, Mud Silt Remover, Mud Conditioner, Sediment Remover, Eazy Mudsolv-C</p>

Sediment Mud Silt Poly electro Dispersant chemically works as MUD AND SILT CONDITIONER in ship Ballast Tanks. Its electrolytic action repels mud particle with each other and keeps in suspension and cleans fouled systems. The repulsion properties of mud Removes mud, silt, and sedi ments from ballast tanks easily.

Continued uses of Mud Silt Remover helps to  prevents the deposition of sediments, mud or silt in ballast tanks, cooling water systems, pipelines etc

Sediment Mud Silt Poly electro Dispersant is most common and valuable product for Ballast Tank.

Mud Silt Remover supplier in Mumbai, Kandla, Vizag - Visakhapatnam, Kolkata - Haldia, Paradip, Chennai - Ennore,  Fujairah, Dubai, Sharjah, Abu Dhabi

Remarks: 

Mud & Silt Remover is principally Organic Poly Electrolyte based chemicals which disperse and react with mud and silt in ballast water tanks and prohibit to form large non adhering particles deposition.